Ensuring all the parts in your car are up to date and properly maintained is imperative for innovative and versatile vehicles such as Audi. One of the more important parts is the EGR valve, or exhaust gas recirculation valve. This component puts small amounts of exhaust back in your vehicle’s combustion chamber to lower temperatures and reduce smog production.

Small parts such as the EGR valve are often incredibly important to the overall performance of your vehicle’s engine. Neglecting to service this part can have detrimental effects to your Audi in the long term.

Warning Signs that your EGR Valve needs to be Replaced

Fortunately for Audi owners, there are some common signs that point to the need to have your EGR valve serviced. Should you notice any of the below warning signals, it’s important that you take your Audi in as soon as possible.

Not replacing an EGR valve when necessary can have detrimental effects on the high-performance of your Audi. A clogged or malfunctioning EGR valve can disrupt the proper air/fuel ratio and lead to engine issues, potentially even stalling. Below are some of the most common warning signs that you should watch out for:

• Check Engine Light: Seeing the “check engine light” notification on your dash can be a worrisome experience for any vehicle owner. Just remember that this is your Audi’s computer alerting you to something not working properly. The computer can sense the circuits in the EGR valve and will alert you if the valve is not functioning as it should. Keep in mind that the “check engine light” can go on for a number of reasons. If, however, the light goes on in conjunction with some of the below signs, it is likely time to take your Audi to the shop.
• Reduced Engine Power: A concerning sign in a dynamic and performance-based car is reduced power. As the driver of your Audi, you know your car best. If there seems to be less responsiveness than normal, pay attention to your fuel. A key signal of a bad EGR valve, due to the disrupted air/fuel ratio, is a sudden and sharp decrease in fuel efficiency with respect to distance driven.
• Rough Idle or Hesitation to Accelerate: After learning how responsive and trustworthy your Audi performs, any idling problems or lack of acceleration should stick out like a sore thumb. When an EGR valve gets stuck open, the excess exhaust may cause your vehicle to idle in a rough fashion.
• Knocking or Pinging Sound: Out of all the warning signs, this may be the most disconcerting for an Audi owner. What you would hear is something known as a Spark Knock, which is simply the fuel detonating. However, if an audible pinging or knocking sound occurs when the temperature gets too hot in the combustion chamber, you can count this as a symptom of a stuck EGR valve.

Now that you are aware of the common warning signs for a faulty EGR valve and know when it should be replaced, the next step is where to go. An EGR valve can be a tricky piece of equipment to replace, and replying on a professional service is the smartest route. In Yardley and the surrounding area, there are a number of shops that could perform the job, but the most trustworthy service for your Audi is Glenwood Foreign Car.

Glenwood Foreign Car for the Maintenance of Your Audi

Our professional auto-mechanics at Glenwood Foreign Car have proudly been serving clients in the region of Upper Makefield Township, Yardley, Newtown, and Morrisville, PA since 1977. We are specialists in maintenancing foreign cars and have experience with over six different brands.

Our extensive knowledge and experience can ensure that your EGR valve gets fixed properly and lasts as long as it should. We are a Bosch Certified Service Center which can help assure you that we only use quality parts, and your vehicle will always receive top-notch service.

We hold a policy that customers come first to ensure your satisfaction when working on your foreign car. Feel free to give us a call to schedule an appointment or come visit us at our location. We look forward to earning your patronage.

The post When to Replace the EGR Valve in Your Audi From Expert Mechanics in Yardley appeared first on Glenwood Foreign Car.

Audis are high-class, high-performance vehicles known for their style and smooth drive. In addition to their style and mechanical prowess, the Audi is also a fairly reliable car to own. Like most cars today, many of the parts and systems of an Audi are electronically controlled. Modern vehicles utilize fuses, wiring, control modules, and other vital components that are required for proper function. However, these electrical parts can occasionally fail in today’s cars, and Audis are no exception.

This article will go over the various electrical systems in your Audi, common problems that can occur with these systems, and how to keep potential problems in check.

Maintaining Electrical Systems and Components

Many parts and systems that make up the inside of your Audi rely on electrical components in order to function properly. Most of these parts are interconnected and count on each other for each one to work the way that they should. This is why it’s so important to keep track of the electrical systems that control your car.

Without properly working electrical parts, your car won’t be able to carry out basic functions like locking doors or rolling up windows. These parts are critical for safety, comfort, and maintaining the value of your vehicle.

Most Common Electrical Problems In Audi

Any type of car is at risk for electrical failure from time to time. However, in the Audi, there are a few specific issues that commonly arise with this sort of vehicle. Watch out for the following in your Audi:

• Issues starting your car: If your car won’t start at all, there could be an issue with the battery or other electrical component.
• Shortages: An electrical shortage is never good and can result in failure of electrical components.
• Faulty fuses: Fuses that are faulty or bad can cause issues in your Audi’s electrical systems.
• Damaged or loose wiring: Wiring needs to be put in correctly and replaced if damaged.
• Problems with spark plugs: Spark plugs are essential to a car’s functioning electrical system.
• Failed starter: This can stop you in your tracks before you can even leave your driveway.
• Failed battery: When your battery is depleted, you will need help to jump it and have it replaced.
• Failed alternator: If your alternator fails, it cannot charge your battery to keep the engine running. This will need replacement.

If you notice any of these problems in your Audi, or suspect something is wrong with your electrical system because of potential symptoms, you should take your car to a specialist as soon as you can. These issues must be addressed promptly before more pieces of your car’s electrical system are damaged, inhibiting function.

It’s also important to keep an eye on certain parts of your car’s electrical system and get them serviced regularly. If you’re experiencing electrical issues, the problem likely came from the following areas: the starter, the alternator, the battery, fuses, or wiring in your Audi.

A trained mechanic will be able to efficiently diagnose and repair the problem at the place in which it came. They can also recommend a plan of treatment that addresses the problem’s source along with collateral damage that can impact your car’s drive and performance.

Glenwood Foreign Car

At Glenwood Foreign Car, we thoroughly understand your Audi’s electrical system and can quickly diagnose and service any potential issues. Our ASE-certified mechanics are prepared to assess and repair your Audi’s electrical components, whether the problem is with one part or has had impacts on additional aspects of the electrical system.

Our mechanics take pride in their work and guarantee the best customer service along with the highest quality of work done on your car. We value communication with our drivers every step of the way and work to keep customers confident in their driving quality after a visit with us.

We’ve serviced Audi drivers in the Yardley, Upper Makefield Township, Newtown, and Morrisville, Pennsylvania areas and would be happy to take a look at your car. Our technicians have decades of experience put together to create the best possible repair experience for you and your Audi. At Glenwood Foreign Car, we work to offer you the best possible, dealership-level service, without the dealership price.

If you find yourself experiencing any of the above problems with your Audi’s electrical system, or simply need another service or repair, bring your car to see us today.

* Audi S5 Car image credit goes to: Bobislav.

The post Common Electrical Problems in Your Audi and Signs of Failure appeared first on Glenwood Foreign Car.

An Audi is a sleek and innovative vehicle with intricate systems that work to provide you with high-quality performance. It also requires high-quality care. Taking care of your Audi requires a far bulkier commitment to service than the average car, but you don’t need to go to a dealership to keep it running smoothly.

To maintain that peak performance, a good car owner needs to receive regular maintenance. This includes repairing and replacing components over time as well as bringing it to a mechanic immediately when the check engine light is illuminated. It may be alarming to see the light is on, but that doesn’t have to indicate a severe issue.

Your Audi will automatically illuminate the check engine light when it has detected a problem within its onboard diagnostics system. Every Audi was designed to include a high-tech performance monitoring system with a computer and a series of sensors throughout the vehicle. If the control unit detects that the data is out of factory specifications in any way, the check engine light will flash to draw your attention to the problem. One of the more common causes can be that your oxygen sensors need replacing.

What is an oxygen sensor?

An oxygen sensor is one of the most important elements in a modern engine management system. There are two to four sensors about the size and shape of a spark plug located near the car engine’s exhaust stream. In real-time, it works with information from other sources to help determine the air-fuel ratio of a combustion engine. More simply, it calculates how much oxygen is in the exhaust and makes adjustments to the amount of fuel being used in the engine.

There are a few different reasons why oxygen sensors need replacing, but they also wear down over time just due to normal usage. The vehicle begins functioning with a delayed response and eventually fails. If you continue to use your car with damaged sensors, the engine will sustain damage while consuming far more gas than is needed.

Replacing the Oxygen Sensors in Your Audi

To replace the oxygen sensors on your own, you’ll need a jack and jack stands, an oxygen sensor socket or appropriately sized open-end wrench, an OBD II scan tool, and the replacement oxygen sensors.

Before doing anything, connect the OBD II scan to the vehicle and read the displayed codes to determine which specific oxygen sensors have failed and need to be replaced.

Once you know where the problem is, raise the vehicle on the side that will allow you access to the sensor and secure it using the jack stands.

Identify the damaged oxygen sensor and disconnect the wiring harness connector. Using an oxygen sensor socket or open-end wrench, loosen and remove the oxygen sensor. Compare the original and replacement oxygen sensors to ensure the correct fitment.

Install the replacement oxygen sensor and connect the wiring harness connector. Once the new sensor has been installed and secured, reconnect the OBD II scan tool and clear the codes. Start the vehicle and monitor your dash to see that the check engine light is no longer on.

When do I need to see a professional?

While this is often a simple replacement that you can do on your own, many people are either not comfortable doing it or do not possess the tools needed to complete it at home. If your check engine light does not turn off after the procedure or you need assistance, see an Audi-certified mechanic.

Glenwood Foreign Car will Replace Your Audi’s Oxygen Sensors

At Glenwood Foreign Car, we take pride in maintaining your Audi’s high level of performance so you can continually get the best your vehicle has to offer. For over 40 years, we have committed ourselves to being the area’s preferred service center for foreign car repair. We provide customers with quality services and repairs in line with Audi’s manufacturer-recommended maintenance plan including the replacement of faulty oxygen sensors.

Though we are located in Morrisville, PA, Glenwood Foreign Car also services vehicles from the Upper Makefield Township, Yardley, and Newtown areas. Call us today to speak with one of our experienced technicians or to schedule a service appointment for your Audi.

The post Tips on Replacing the Oxygen Sensor of Your Audi From Expert Mechanic in Yardley appeared first on Glenwood Foreign Car.

It is a common trend in Audi vehicles to have issues with a leak in the camshaft tensioner. As most Audi vehicles use the camshaft tensioner, it is important to make sure it is tightened correctly and in good shape, since leaks can cause timing belt failure and eventual engine damage.

It’s important once you notice a leak or anything that’s out of the ordinary for the functionality of your car that you seek a mechanic’s advice immediately. Something small like a leak can easily transform a small problem into a far more expensive and time consuming one.

Symptoms of Camshaft Tensioner Leaks

It is recommended that anytime you notice something off with your vehicle you should seek the advice of a certified professional for your safety, and for the safety of the other drivers on the road.

Problems With Acceleration

You might notice your car is having difficulty accelerating. This is one of the direct issues related to tensioner leaks, as it affects the pressurization of the engine, which ultimately affects the RPM of your vehicle. Issues with acceleration need to be addressed quickly, as they can signal worse component failure and affect how you interact with other drivers on the road. The likelihood of an auto accident due to reduced acceleration is high, and you are at risk of being involved in a collision.

Belt Wear and Belt Component Failure

Belt wear can happen over time due to the lifespan of the material, but a leak can cause typical belt wear to accelerate rapidly. Belt wear can ultimately lead to belt component failure, which can cause issues like engine failure. If a belt has broken due to an issue caused by a tensioner leak, there could be pieces lodged in your engine. In this case the engine will not start at all.

Uncommon Sounds or Check Engine Light

This is a typical issue to look for regarding any sort of vehicle malfunction. If the check engine light comes on, it could be due to anything from an open gas cap to engine failure. It is important that you do not ignore your check engine light. Get it checked as soon as you can. Most car repair or service shops will run a diagnostic test for free, regarding your check engine light. In addition to that, if you notice any strange noises coming from your car that aren’t common, you should always get it looked at. If it is something regarding a tensioner leak, you’ll notice a ticking and a grinding noise.

Preventative Measures

Daily wear and tear that comes with the normal movement of your car can unfortunately add to the wear on the camshaft tensioner. You have to make sure all of your components are well-lubricated and kept up to date so that your daily routine doesn’t cause as much damage.

Routine service on your car can help prevent issues pertaining to belt wear and camshaft tensioner failure, since an overstretched tensioner, worn out belts, or low/old oil can affect the functionality. Routine oil changes and check ups can ensure your car stays running smoothly so a small problem doesn’t become a costly one.

Glenwood Foreign Car is the Best Garage in Morrisville to Help

Glenwood Foreign Cars is the leading garage for foreign auto service in the Yardley and Newtown PA areas. We have served our community faithfully for 43 years and offer professional and quality repair and maintenance services you can count on. We are a Bosch Certified Service Center, so you can be assured that your foreign car is receiving the best care you can get.

We are located in the Upper Makefield Township in Morrisville, PA and are easily accessible from the surrounding areas. Our mission is to provide great service at a good value to our neighbors in PA with guaranteed customer satisfaction.

We offer full-service repair and maintenance to a variety of vehicles, including and not limited to Audi, VW, BMW, Porsche, and Mercedes Benz. Your car is important to you, and if you’re noticing the signs of camshaft tensioner failure in your Audi, we want to help you and get you back on the road safely and quickly. Call us today.

The post Best Garage in Morrisville for Repairing Camshaft Tensioner Leaks in Your Audi appeared first on Glenwood Foreign Car.

The last thing that Audi owners expect from their vehicles is for the car to develop problems. These vehicles normally cost a pretty penny due to the standard and quality that the manufacturer has put into their designs. Audis are not only excellent performers, but they also offer safety and comfort in an elegant and sleek manner that is simply irresistible.

For this reason, Audis are held to a higher standard by car owners. However, these vehicles are not immune to mechanical issues which usually plague all other vehicles. One of the most common problems that Audis develop over time is the valve cover oil leakage. The valve cover is a component located within the engine whose purpose is to protect the valve train. The valve train is made up of a number of components that are responsible for the regulation of fuel and air flow into the cylinders in the engine as well as the exhaust gases from the internal combustion process.

The valve cover in the Audi is located at the top of each cylinder head to ensure that the fuel does not leak out of the engine and there is no damage to the valve train components.

Causes of Valve Cover Damage

The main cause of valve cover damage is the usual wear that affects different car parts after they have covered several hundred-thousand miles. These valve covers are often made of plastic, and regardless of how fortified this material is, it is still delicate and prone to deterioration. Temperature changes in the engine also cause the valve cover to expand and contract. This can lead to the development of cracks in the cover.

In addition, a faulty valve cover gasket seal can also compromise the functions of the valve cover. The valve cover gasket seal is responsible for securing the valve cover in place on top of the cylinder. This device is made up of a fortified rubber material that can easily become degraded over time, causing the valve cover to become loose and start to leak.

Effects of Valve Cover Oil Leaks

Valve cover damage allows oil from the engine to start leaking out into the other parts of the engine. In fact, it goes without say that this can have devastating effects on the engine and even impair engine performance significantly. In fact, if left unchecked for a long time, valve cover oil leaks can cause extensive damage to the engine, thereby necessitating a complete overhaul. Replacing the entire engine in your Audi can be an extremely expensive affair, especially if it is an unplanned expense.

Symptoms of Valve Cover Oil Leaks

Some of the signs that you will notice in your Audi in the event of a valve cover leak include:

• The smell of burning oil from the engine bay. This is as a result of the oil dripping into the extremely hot parts of the engine and getting ignited in the process.
• Misfiring engine due to the leaking oil finding its way into the spark plugs. This impairs the ignition function of the plugs and causes the engine to misfire.
• Oil stains will also remain under the front end of your car when there is a leak. Depending on the size of the leak, you will either have small stains or even puddles of brown fluid, pointing to a larger leak.

Leaking oil from the engine will generally have devastating effects on the engine performance and make your driving experience quite unpleasant. For this reason, you should endeavor to have it fixed as soon as possible.

How to Handle Valve Cover Oil Leaks

Valve covers can easily be repaired by following simple steps. Unfortunately, not many people happen to be DIY enthusiasts, and they would rather have someone else take care of their repairs. Seeking the help of a professional mechanic will make it easier to get the replacement done correctly and without leaving room for future troubles that may arise from improper installation.

At Glenwood Foreign Car, we have certified technicians with extensive experience in handling luxury brands, such as the Audi. We are available to offer our excellent services to Audi drivers in and around Upper Makefield Township, Yardley, Newtown, and Morrisville, PA. We are only a phone call away from helping you get your Audi back on the road. Simply call us for an appointment. We will do the rest.

The post Reasons Behind Valve Cover Oil Leaks in Your Audi in Morrisville appeared first on Glenwood Foreign Car.

Audis are popular luxury cars for a reason—they are attractive, always equipped with the latest technology, reliable, and the brand offers a wide range of vehicles so there is something to suit everyone’s needs. Audi is a German company, a part of the Volkswagen Group, and has been around since the early 20th century. With a headquarters in Ingolstadt, Germany, Audi has eleven production facilities in nine countries worldwide.

Of course, no matter how reliable and well-made a car is, there are bound to be issues from time to time with any piece of technology. Let’s take a look at some typical issues that occur in Audis, as well as the best course of action for dealing with them when they arise.

Common Audi Problems

Some of these issues are unique to Audis while others apply to any car, but there are several common problems many Audi owners will face at some point.

The most common mechanical problem in an Audi is failure of the ignition coil or spark plug. Catalytic converters can also cause trouble, often failing due to clogging or carbon build-up. Keeping your engine well-maintained can help avoid catalytic converter failure. Other common issues with Audis include problems with exhaust gas re-circulation, oil leaks, oxygen sensors, and loose fuel caps.

The number one most common problem in Audis, however, is issues with electrical components, such as failure of digital dashboard display or console, malfunctioning lights, and failed taillights. Unfortunately, electrical problems are the most expensive to fix, and can cost car owners over a thousand dollars plus labor costs.Ainstrument cluster fails, the entire instrument cluster needs to be replaced. Of course, there are some preliminary steps car owners can take to try to assess the situation before bringing the vehicle in for a possibly costly and time-consuming repair.

First, check the control switches and the dashboard light fuse. A blown fuse can disable lights on the digital dashboard, and fuses can be easily replaced at home. A blown bulb on the dashboard can also cause trouble. Some bulbs can be replaced at home, while other LED-type bulbs need to be replaced by a professional. If only one light on the dashboard isn’t working properly, this is a good indication that a blown bulb may be the culprit. If the entire display isn’t working, it is more likely the problem is fuse-related or a defective instrument cluster.

It is also possible for digital displays to have pixel problems, which manifest as lines or columns of the display that appear to be missing.

Typically, the best course of action if you are experiencing digital dashboard display failure in your Audi is to bring it to an accredited service center for professional evaluation to ensure you maintain the best condition and value of your vehicle. The good news is that many digital instrument clusters come with a lifetime warranty, so while this may seem like a serious issue, it is possible you will be back on the road in no time without a large, unexpected bill.

How Glenwood Foreign Car Can Help

Glenwood Foreign Car has been servicing the areas of Upper Makefield Township, Yardley, Newtown, and Morrisville, PA since 1977. We specialize in foreign car repair and are a great choice for anyone experiencing problems with an Audi, Mercedes Benz, Volvo, BMW, Acura, Infiniti, Nissan, Lexus, or Toyota. We have a partnership with Bosch and use Bosch parts whenever possible, acting as an independent service center for Bosch Service.

Glenwood Foreign Car offers all standard services—multipoint inspections, oil and filter replacement, comprehensive fluid checks, engine component checks, tire rotation and inspection, Pennsylvania state inspections, and premium auto detailing. We also offer loaner cars while your vehicle is being serviced and even have a selection of luxury pre-owned vehicles for sale.

The post Tips to Fix Digital Dashboard Failure in Audis appeared first on Glenwood Foreign Car.

Audi vehicles are some of the best on the market – they’re powerful, luxurious, elegant, and well designed. While it’s certainly a luxury in itself to drive an Audi vehicle, it’s important to keep in mind that they’re not without their faults, failures, and malfunctions. One issue that Audi drivers report experiencing more often than other performance issues is engine misfiring.

Engine misfiring is also described as hesitation, jerking, bucking, or a loss of power, but every drivers’ experience is different, and every car is further different. Engine misfiring is damaging to your Audi’s engine, and it’s a huge inconvenience for you, the driver. Bringing your car to an automotive shop may be the last thing you want to do, but it should be the first thing on your mind if you experience engine misfiring. Performing an accurate diagnosis for your Audi is the first step toward fixing the issue. In this article, we’ll focus on what the possible causes of engine misfiring could be and how you can handle the problem quickly and efficiently.

What Problems May Contribute to Engine Misfiring?

As we mentioned, it is critical to have your Audi assessed to determine what the exact source of the engine misfiring is so that you don’t spend a fortune in a trial and error style repair routine. It is helpful to have a basic understanding of what could be causing the engine misfiring so that you can communicate better with your trusted Audi automotive shop and not get taken for a ride, so to speak. Here are some of the possible avenues for engine misfiring to occur:

A faulty engine control unit

Your Audi is a modern, well developed piece of technology that includes several different systems of computers to help determine ways to optimize your car’s performance. The engine control unit, also referred to as the engine control module, is the primary means of the car’s communication with the various modules throughout the vehicle. If the primary control unit is malfunctioning or failing, it can certainly lead to engine misfiring.

Transmission hiccups

Audi transmissions are designed to perform with high standards, which generally lead to a pleased customer base. However, all transmissions encounter failure or malfunction at some point in the car’s life. There are certain factors that may contribute to how quickly your transmission runs into issues, including:

• Vehicle age
• Vehicle mileage
• Common driving habits
• Frequent driving conditions
• Frequency of use
• Adherence to your Audi’s transmission servicing routine

It is essential to be aware of how these factors may influence your Audi’s transmission to prevent engine misfiring as a byproduct of a faulty transmission.

Improper fuel/air mixture

Your Audi’s engine requires a precise mixture of fuel and oxygen in order to combust and ignite, which fires the engine. Engine misfiring occurs often when the ratio or mixture is off, or is lacking enough fuel or air. It’s critical to keep the fuel system in excellent condition by keeping fuel pumps, fuel filters, fuel injectors, and oxygen sensors in good working order all year long.

Issues with the ignition components

Now that you know a little bit about fuel/air ratios for your Audi’s engine, it makes sense that your engine requires a spark, or something to help ignite the fuel/air mixture, providing the engine with power. Here are some components of this ignition system that can fail and cause misfiring to occur:

• Ignition coils
• Distributor caps
• Ignition cables
• Spark plugs

How to Address Engine Misfiring Effectively

Taking care of your Audi on a regular basis is one of the best ways to keep symptoms like engine misfiring at bay. By caring for your vehicle in a routine fashion, you present more frequent opportunities for performance issues and part failures to be addressed by your automotive professional. Here are a few tips on what you can do to ensure your Audi receives the highest standard of care to match it’s engineering and design quality:

• Find an Audi specialist near you
• Perform frequent inspections of the above-mentioned components
• Don’t let concerning symptoms go on without examination
• Make sure your Audi specialist uses the proper replacement parts for repairs

Here at Glenwood Foreign Car, we dedicate ourselves to perfectionistic standards that match the vehicles we service, such as Audi. The residents of Upper Makefield Township, Yardley, Newtown, and Morrisville, PA, have trusted us with caring for their automobiles for years, and we are glad to continually welcome new members to our family. If you have questions about our expertise or would like to schedule an appointment, please feel free to call us directly.

* Audi Q3 2.0 TFSI S-line image credit goes to: y_carfan.

The post What Causes Your Audi Engine to Misfire appeared first on Glenwood Foreign Car.