Blog

In a Land Rover, the brake rotor is an essential component of the braking system. It is a flat disc-like element that is attached to the wheel hub and brake caliper and provides the necessary form of friction for effective braking.

The brake rotor is made up of metal that has been machined to create heat dispersing holes and channels throughout the surface. This helps to dissipate brake heat quickly to ensure brakes remain consistent and smooth, even over long distances or when pressure is applied in more strenuous scenarios. Ultimately, brake rotors provide excellent brake performance by ensuring safety while driving, and when it fails or begins to break down, you’ll want it repaired straight away for your safety. Below are the warning signs of a brake rotor failure:

A Vibrating or Pulsing Brake Pedal

One of the most common symptoms of brake rotor failure is a vibrating or pulsing brake pedal when the brakes are applied. This can occur when the rotors are worn unevenly or have become warped. The vibration is felt in the brake pedal because the brake pads are grabbing the rotors in a pulsating manner, rather than making consistent contact. This can be a sign of brake rotor problems and should be inspected by our expert mechanics.

Screeching or Squealing Noise When Braking

Another common symptom of brake rotor failure is a screeching or squealing noise when the brakes are applied. This noise is typically caused by the brake pads worn to the point where the metal indicators, called “wear sensors,” start to rub against the brake rotor. If you hear a screeching or squealing noise when you apply the brakes, make an appointment to have us take a look.

Grinding Noise When Braking

A grinding noise when braking can be a sign of serious brake rotor problems and should be addressed immediately. This noise is usually caused by metal-on-metal contact between the brake pads and the brake rotors, which means the brake pads have worn down to the point where they are no longer making proper contact with the rotors. Driving with grinding brakes can cause further damage to the rotors and other braking components, and can also significantly reduce your vehicle’s braking ability.

Your Land Rover Pulls to One Side When Braking

If your Land Rover pulls to one side when you apply the brakes, it could be a sign of brake rotor problems. This can occur when the rotors are worn unevenly, or if one rotor is damaged or has failed completely.

Brakes Feel “Soft” or “Spongy”

A soft or spongy brake pedal can be caused by worn brake pads, worn rotors, or a loss of brake fluid. You want to ensure your safety in your car and that of your passengers at all times. You must be able to brake fully, and brake hard if needed, and you can’t do that if you press the pedal and it fails to react on time.

Brake Warning Light is Illuminated

This warning light can be caused by a variety of issues, including low brake fluid levels, worn brake pads, or a problem with the brake system’s hydraulic components. It is important to have your brake system inspected and the source of the problem found so you aren’t charge for replacement parts that aren’t necessary. Choosing the right mechanic and garage to service your Land Rover will make a huge difference in your expenses, and it will give you peace of mind, knowing you can brake properly when needed.

Call the Experts at Glenwood Foreign Car!

Brake rotors play a critical role in a vehicle’s braking system, and understanding the signs and symptoms of brake rotor failure can help keep drivers and their vehicles safe. From vibrating or pulsing brake pedals to grinding noises when braking, there are many symptoms of brake rotor problems that drivers should be aware of.

If you experience any of the above symptoms in your Land Rover, it is important to give us a call to speak with our knowledgeable technicians today to schedule an appointment for service. You can also stop in from nearby Upper Makefield Township, Yardley, Newtown, and Morrisville, PA.